Input

ANGSD currently supports various input formats

<classdiagram type="dir:LR"> [sequence data|BAM;CRAM;mpileup{bg:orange}]-[genotype;likelihoods|VCF;GLFv3{bg:orange}] [genotype;likelihoods|VCF;GLFv3{bg:orange}]-[genotype;probability|beagle inputation{bg:orange}] </classdiagram>

Below is a short description of those we believe is of most use. Note that CRAM files are used interchangeably as BAM files. So use -bam for supplying both a CRAM list or BAM list or both.

Sequence data (BAM/CRAM/mpileup)

BAM/CRAM

ANGSD accepts BAM/CRAM files for mapped sequences and both are handled using the same -bam option. For information on the file specification and file creation see the samtools website [1]. These are required do be sorted according to reference.

./angsd -bam

-> Analysis helpbox/synopsis information:
	-> Command: 
./angsd -bam 
	-> angsd version: 0.910-9-g853ec23-dirty (htslib: 1.2.1-251-g2072527) build(Dec  4 2015 09:07:28)
	-> Fri Dec  4 09:09:02 2015
---------------
parseArgs_bambi.cpp: bam reader:
	-r		(null)	Supply a single region in commandline (see examples below)
	-rf		(null)	Supply multiple regions in a file (see examples below)
	-remove_bads	1	Discard 'bad' reads, (flag >=256) 
	-uniqueOnly	0	Discards reads that doesn't map uniquely
	-show		0	Mimic 'samtools mpileup' also supply -ref fasta for printing reference column
	-minMapQ	0	Discard reads with mapping quality below
	-minQ		13	Discard bases with base quality below
	-trim		0	Number of based to discard at both ends of the reads
	-only_proper_pairs	1	Only use reads where the mate could be mapped
	-C		0	adjust mapQ for excessive mismatches (as SAMtools), supply -ref
	-baq		0	adjust qscores around indels (as SAMtools), supply -ref
	-if		2	include flags for each read
	-df		4	discard flags for each read
	-checkBamHeaders	1	Exit if difference in BAM headers
	-doCheck	1	Keep going even if datafile is not suffixed with .bam/.cram
	-downSample	0.000000	Downsample to the fraction of original data
	-minChunkSize	250	Minimum size of chunk sent to analyses

Examples for region specification:
		chr:		Use entire chromosome: chr
		chr:start-	Use region from start to end of chr
		chr:-stop	Use region from beginning of chromosome: chr to stop
		chr:start-stop	Use region from start to stop from chromosome: chr
		chr:site	Use single site on chromosome: chr
Will include read if:
	includeflag:[2] (beta)each segment properly aligned according to the aligner, 
Will discard read if:
	discardflag:[4] (beta)segment unmapped,

Arguments

-bam [filelist]

-b [filelist]

The filelist is a file containing the full path for each bam file with one filename per row.

Example of a filelist with 6 individuals

/home/software/angsd/test/smallBam/smallNA12763.bam
/home/software/angsd/test/smallBam/smallNA11830.bam
/home/software/angsd/test/smallBam/smallNA12004.bam
/home/software/angsd/test/smallBam/smallNA06985.bam
/home/software/angsd/test/smallBam/smallNA11993.bam
/home/software/angsd/test/smallBam/smallNA12761.bam

Example of estimating allele frequencies from bam files

./angsd -out out -doMaf 2 -bam bam.filelist -doMajorMinor 1 -GL 1 -P 5

Optional arguments

-r [region]

Specify a region with in a chromosome using the syntax [chr]:[start-stop]. examples

chr1:1-10000             \\ first 10000 based for chr1
chr2:50000-              \\chr2 but exclude the first 50000 bases
chr11:1-                 \\all of chr11
chr11:                   \\all of chr11
chr7:123456              \\position 123456 of chr7

-only_proper_pairs [int]=0

Include only proper pairs (pairs of read with both mates mapped correctly). 1: include only proper (default), 0: use all reads. If your data is not paired end you have to choose 1

-rf [region file]

specify multiple regions in a file.

-nLines [int]=50

Number of lines to read per file at a time. Reducing this number will decrease the RAM usage with a small cost to the speed.

-uniqueOnly [int]=0

remove reads that have multiple best hits.. 0 no (default), 1 remove

-remove_bads [int]=1

Same as the samtools flags -x which removes read with a flag above 255 (not primary, failure and duplicate reads)

-minQ [int]=0

minimum base quality

-minMapQ [int]=0

minimum mapQ quality -baq [int] =0 perform baq computation, remember to cite the baq paper for this.

Genotype Likelihood Files

-glf

A simple format for genotype likelihoods: Every genotype likelihood is saved as binary double log scaled. In the following order. AA,AC,AG,AT,... for each individual

-glf [filename]

NB and remember to supply a -fai file and number of individuals with -nInd

This is the format used by supersim subprogram and the -doglf 1 option in angsd

VCF files

VCF file as input is now included but with some limitiations. Only chr,pos,ref,alt and gp/gl tags are being used, and we discard indels and non diallelic sites. Futhermore you are required to include a fai file and the number of individuals.

#for using GL tags
./angsd -vcf-gl ../1000g/ref.r1274.vcf -fai fai.fai -nind 181 -domaf 1 -out two
#for using GP tags
./angsd -vcf-gp ../1000g/ref.r1274.vcf -fai fai.fai -nind 181 -domaf 1 -out two

NB The 4.2 version of the vcf specifiation clarifies that GP should be phred scaled post probs of the genotypes. But it seems that most software is using non-phred scale. So ANGSD uses the raw GP value. The GL tag is interpreted as log10.

NB you are required to supply a fai file. Otherwise the program will give a warning (this will be changed in future versions).

Genotype Probability Files

Genotype probabilities in gz beagle format can be used as input. The format used is the haplotype imputation format outputted from beagle [2].

NB you are required to supply a fai file. Otherwise the program will give the following warning (this will be changed in future versions).

Brief Overview

./angsd -beagle
Command:
./angsd -beagle 
	-> angsd version: 0.569	 build(Dec 11 2013 17:27:32)
----------------
beagleReader.cpp:
	-beagle	(null)	(Beagle Filename (can be .gz))
	-intName=0	(Assume First column is chr_position)
	Use -chunkSize for defining how many sites to use at a time
	Use -fai to supply a fai file

options

To include a beagle file use the options

-beagle [fileName]

beagle file name. The file must be gzipped.

-intName [int]

default 1. If the SNP name are written as chr_position this information will be parsed. If the SNP name is in another format then use -intName 0.

Example

The file format is a single linje per site. The first 3 coloums are

• markerName
• alleleA
• alleleB

For each individual 3 coloums are added. These three colums should sum to one.

Example of a file with two individuals

marker alleleA alleleB NA06984 NA06984 NA06984 NA06986 NA06986 NA06986
chr9_95759065 G A 0.6563 0.3078 0.0358 0.5357 0.4016 0.0627
chr9_95759152 C A 1 0 0 0 1 0
chr9_95762332 G A 0.925 0.0734 0.0015 0.894 0.1031 0.0029
chr9_95762333 A T 0.8903 0.1067 0.003 0.811 0.1797 0.0093
chr9_95762343 G T 0.9149 0.0835 0.0017 0.8396 0.1541 0.0064

Example of estimating allele frequencies from beagle files

./angsd -out out -doMaf 4 -beagle file.beagle.gprobs.gz -fai ref.fai

the reference fai can be optained by indexing the reference genome or by using a bam files header

samtools view -H  bams/smallNA11830.mapped.ILLUMINA.bwa.CEU.low_coverage.20111114.bam | grep SN |cut -f2,3 | sed 's/SN\://g' |  sed 's/LN\://g' > ref.fai